It can hit you at any time and in the blink of an eye. A small power surge, overvoltage, power failure, or other voltage fluctuation is all it takes to permanently damage your devices, destroy data, and corrupt your operating system’s files. A faulty power supply can gradually wear down your system over time without you noticing until it eventually fails. One way to avoid such a disaster is to install a UPS. A UPS (uninterruptible power supply) is a power supply that contains a battery to maintain power in the event of a power outage. Most UPSs also filter and regulate power. A UPS can used for most electronic devices, although this article focuses mainly on computers.
Generally responsible for power protection (especially uninterruptible power supplies). The IT department is also responsible for fitting more and more revenue-generating servers into a shrinking computer room.
A second space issue is the ability of the electrical system to provide enough power to run more and more equipment. Electrical capacity is usually the responsibility of the facility manager, and this is where problems arise when facility managers don’t know how much capacity is use now and in the future as power consumption continues to rise. Facility managers today are at the forefront of using uninterruptible power supplies (UPS). Visit also: APC ups price in Pakistan
Knowing the power and expansion plans of IT, how quickly are applications growing?
Eighty-two percent of respondents to the Uptime Institute’s 2008 Energy Efficiency Strategies Survey indicated. That their organization’s power consumption had increased significantly in the past 12 months. Of those, 92% said the increase exceeded expectations.
Between managing the growing and complex demands of today’s IT departments and planning for the future. The impacts of additional servers on UPS capacity is an important issue often overlook by IT managers, but not by managers.
Another important aspect FMs need to be aware of is the fundamental difference between IT managers’ “strategies for the future” and themselves. FMs typically plan for building management infrastructure to pay for itself over 15-20 years, while IT managers are used to a much shorter timeframe of 6-8 years. UPS systems can have a much longer life than standard IT products, but only if future system expansions and capacity increases are planned for from the beginning.
In addition to capacity planning, facility managers should brought in to evaluate the logistical aspects of UPS specification and installation. How will the UPS units (some large units can weigh more than 800 kg) transported to the site and installed in their final location? The elimination of the transformer on some UPS models has had a fundamental impact on overall size and weight, resulting in a 50% reduction in footprint and a 70% reduction in weight. Where weight is a factor, floor loading is also consider, as is the impact of testing power protection devices under load conditions without disturbing protected IT loads.
Many UPSs are now part of the plant, making them much more accessible to managers than ever before. Many are connect to building monitoring or building management systems. So their alarms (when triggered by faults) can seen and heard. This capability improves the resilience of power protection in general. But must monitored – an inaudible alarm is not a true alarm!
As with electrical power, it is very important to continuously monitor cooling requirements. As more and more equipment added to the system to ensure a consistent, uniform temperature. Today’s high-performance servers are equipped with a large number of hot components. They may be more energy efficient because they use less power than their predecessors. But in crowded server rooms, right next to the UPS, they can generate more heat. This is especially important for UPS batteries, as their lifespan can drastically shortened. If their temperature fluctuates above 20-25 degrees Celsius.
Evaluating UPS loads in terms of their criticality to business continuity in the event of a power outage. And how they interact allows you to categorize them as critical, essential. Or non-essential and determine their interdependency.
UPS loads are also categorize as linear and nonlinear, depending on how they draw current from the power system waveform. They can be inductive, capacitive, or resistive, which affects the size and design of the UPS system.
To protect their investment in uninterruptible power supplies. Facility managers need to be aware of current and future power requirements and their impact on power protection needs. Logistics, floor loading, and location should also be considered before installation. The impact of UPS maintenance and testing on the loads to be protected must be considered. As well as cooling capacity and the type of loads.
For details regarding Uninterruptible power supplies (UPSs), please visit our website: https://www.multilinkeng.com
