The Nexxt WiFi range extender is a dual-band wireless extender that extends the available signal of the router. It delivers a speed of almost 1200MBps through which you can enjoy seamless video streaming and gaming without any lag. It can be wired or wireless. For a wired connection, you have to use an ethernet cable. The two external antennas help it to extend the network signal over a wide area and even at every corner of your home and workplace. There are five LED lights on the front indicating the LAN connection, WAN connection, power, 2.4GHz band, and 5GHz band to make it convenient for the users to understand. It has a reset button and the power on or off button on the right side and two ethernet ports on the bottom.
It connects with the maximum types of routers available in the market. Its design is unique as it can be mounted on the wall. It has a socket intact on its back which can be directly plugged into the AC socket. The setup of this extender can be done within a few minutes. Turn on the WPS button on both the extender and the router to connect. Further settings of this extender can be managed by visiting re.nexxtsolutions
Connect The Nexxt WiFi Range Extender With Any Router
Firstly open the shipment box and take out your extender safely. Read the user manual available in the box. Make sure that the other wireless device is not close to the extender. Otherwise, that device may connect to the router and create a barrier in connection. Also, avoid metal devices and walls. The distance between the extender and the router should not be too far. Now follow the below steps to establish a successful connection between the router and the extender.
Now turn on the WPS button on both the extender and the router. You will see that the green light is blinking on the extender. It means the device wants to connect with the router. Find the perfect spot for your extender by moving it to different places until the blinking green light turns solid. When the blinking green light turns into solid green, it means the extender successfully connect to the router and is in a perfect location. Now you can surf the internet and enjoy video streaming and gaming. Now we’re gonna explain the procedure and safety measures while resetting the Nexxt extender.
Reset The Nexxt WiFi Range Extender
Resetting the extender is maybe the final solution if there is an issue. You can reset the extender in just one touch. Plug the extender onto the AC power. You don’t need additional hardware to mount the extender onto the wall, as it has a socket intact on its back. Look for the right side of the extender. You will see a reset button. Push the reset button for at least 50 to 60 seconds. Use a paper clip-type object if you are facing a problem while holding it. That’s it, all the settings you have done related to this extender erase and the Nexxt extender is reset. Now connect with the router again to surf the internet connection by following the instructions as we mentioned above.
Tips To Secure Your Nexxt WiFi Range Extender Signal
You can secure the Wifi signal by logging into the web page. Visit the official website or type an IP address to sign in. A new page with web management will open. You will see a wireless settings option at the top and then select basic settings. On the right of it, choose wireless security. A new interface with network mode, SSID, channel, etc seen on the screen. Choose the security mode and encryption type. We suggest you choose WPA2, WPA-PSK, or WEP security encryption and select the password with at least one upper case letter, lower case letter, and numerical letter. Select the encryption type to AES.
Reviews
It is a very good extender. It delivers a speed of 1200Mbps which is used to surf the internet, stream video, and gaming. Due to its portable and wall mount design, it saves hardware costs to be intact on the wall. Two Gigabit ports help to make a connection with an ethernet cable and to add an external device. Setup is very simple and can be done with one touch. A user-friendly interface helps to manage or change the settings just by logging in to the browser. Overall, a very good product and I suggest all the buyers go for it.
